win3.1 ve win95 5800 da !
Sponsorlu Bağlantılar
Silinen Üye 94869
Kapalı Hesap
Del Rey
Üye
Windows 3.1'de yaptığımı kaydetmek istiyordum ve şöyle bir yol buldum:
Windows 3.1 ISO dosyasını C'de bir klasöre çıkartın. Mesela "windows"
Şimdi, dosbox'ı açın, klavye yamasını yüklediyseniz klavyeyi de açın ve yazın: mount y /data/windows - Bununla Y sürücüsünü ayarladık ve y sürücüsünün ana klasörü de windows klasörümüz.
Şimdi Y'den komut vermek için "Y:" yazın ve entera basın
Daha sonra Y:\> Şeklinde ibre çıkacak, oradan devam edin ve ekleyin: setup.exe yazın. Böylece devam edeceksiniz...
Windows'u kurduktan sonra DOSbox altında tekrar kaldığınız yerden devam etmek için şunu yapın:
Sistemi aynen y'den mount edin yine ve komutu y'ye alın. Daha sonra da win.com komutunu verip entera basın.
Windows 3.1 ISO dosyasını C'de bir klasöre çıkartın. Mesela "windows"
Şimdi, dosbox'ı açın, klavye yamasını yüklediyseniz klavyeyi de açın ve yazın: mount y /data/windows - Bununla Y sürücüsünü ayarladık ve y sürücüsünün ana klasörü de windows klasörümüz.
Şimdi Y'den komut vermek için "Y:" yazın ve entera basın
Daha sonra Y:\> Şeklinde ibre çıkacak, oradan devam edin ve ekleyin: setup.exe yazın. Böylece devam edeceksiniz...
Windows'u kurduktan sonra DOSbox altında tekrar kaldığınız yerden devam etmek için şunu yapın:
Sistemi aynen y'den mount edin yine ve komutu y'ye alın. Daha sonra da win.com komutunu verip entera basın.
evroo
Üye
kardeşim bende 2 yıldır araştırıyorum bitirlü tam ekran yapamadım deliricem biri yardım etsin
musataga
Üye
Linkleri görüntülemek için kayıt olmalısınız
bu linkde var 
- - - Eklendi - - -
| Instructions for playing eye of the beholder in dosbox: 1. Download file (DOSBox_s60_bianry_dependencies.zip):
Linkleri görüntülemek için kayıt olmalısınız
Extract file. Copy everything to memory card. Install every program to memory card (e  .2. Download file (dosbox_s60_20090504.zip):
Linkleri görüntülemek için kayıt olmalısınız
Extract file. Copy everything to memory card. Install dosbox_s60_20090504\full3\dosbox.sisx to memory card (e .3. Download and install program x-plore.
Linkleri görüntülemek için kayıt olmalısınız
4. Download file which contains eye of the beholder 1, 2, 3 and configuration files for dosbox.
Linkleri görüntülemek için kayıt olmalısınız
or
Linkleri görüntülemek için kayıt olmalısınız
Copy directory dos to memory card(e .5. Start x-plore and copy all files from e:\dos\c\Dos\DosBox\ to c:\data. (If problems ocurred copy files to e:\data. You will need to change some lines in configuration files in that case. In dosbox.conf "s60map c:/data/virtkeybmap.txt" change to "s60map e:/data/virtkeybmap.txt". In virtkeybmap.txt "c:/Data/vkobitmap.bmp" change to "e:/Data/vkobitmap.bmp" in several places.) 6. Start program dosbox in mobile. Write eob1 or eob2 or eob3 on virtual keyboard and press enter. bunu çevirin cevabı bulursunuz ..... | ||||
Beşiktaşlı24
Üye
arkadaşlar dosbox.conf dosyasını tam ekran yapma kodunu buldum
indirdiğiniz dosbox.conf dosyasına sağ tıklayın düzenle deyin ve eski kodu silin bu kodu yerine kopylayın sonra kaydedin işlem tamamdır işte kod
[sdl]
# devicescreenx,devicescreeny -- set to your display dimensions
# defaults are qvga (320x240) dimensions
# panoversized -- set to true if you want virtual screen panning for
# oversized resolutions when s60scaler=none
# will 'shrink' if set to false (default)
# pagestepx,pagestepy -- panning steps if panoversized=true' (defaults are 320/240)
# s60scaler -- select ouput scaler to use (default none)
# IMPORTANT:
# dont use leading, trailing or seperating whitespaces
# stick to the syntax "s60scaler=whatever"
# (reason: this is parsed for by a dumb parser, not the one in DOSBOX)
# NOTE:
# when s60 scaling is used mouse (touch-ui) input
# coordinates will be scaled from the device resolution
# to to the displayed resolution. keep that in mind when
# writing your virtual keyboard maps
# possible values:
# 'none' - no scaling (or halfsizing)
# 's60full' - use s60 bitmap scaling
# 's60aspect'
# 'swfull' - nearest pixel sw implemetation
# 'swaspect'
# !!!NOT SUPPORTED IN THIS RELEASE!!! 'glfull' - use opengl-es
# !!!NOT SUPPORTED IN THIS RELEASE!!! 'glaspect'
# rotatescreen -- rotates screen 180 degs if 'true' ('false' by default)
#
devicescreenwidth=640
devicescreenheight=360
panoversized=true
pagestepx=640
pagestepy=360
sensitivity=200
priority=higher,normal
s60scale=swfull
rotatescreen=false
[dosbox]
memsize=10
[cpu]
# core -- CPU Core used in emulation: ,dynamic (dynamic needs more ram!)
# cycles -- Amount of instructions DOSBox tries to emulate each millisecond.
# Setting this value too high results in sound dropouts and lags.
# You can also let DOSBox guess the correct value by setting it to max.
# The default setting (auto) switches to max if appropriate.
core=
cycles=3000
[mixer]
# nosound -- Enable silent mode, sound is still emulated though.
# rate -- Mixer sample rate, setting any devices higher than this will
# probably lower their sound quality.
# blocksize -- Mixer block size, larger blocks might help sound stuttering
# but sound will also be more lagged.
# prebuffer -- How many milliseconds of data to keep on top of the blocksize.
nosound=true
rate=22050
blocksize=2048
prebuffer=10
[midi]
# mpu401 -- Type of MPU-401 to emulate: none, uart or intelligent.
# device -- Device that will receive the MIDI data from MPU-401.
# This can be default,alsa,oss,win32,coreaudio,none.
# config -- Special configuration options for the device. In Windows put
# the id of the device you want to use. See README for details.
mpu401=none
device=default
config=
[sblaster]
# sbtype -- Type of sblaster to emulate:none,sb1,sb2,sbpro1,sbpro2,sb16.
# sbbase,irq,dma,hdma -- The IO/IRQ/DMA/High DMA address of the soundblaster.
# mixer -- Allow the soundblaster mixer to modify the DOSBox mixer.
# oplmode -- Type of OPL emulation: auto,cms,opl2,dualopl2,opl3.
# On auto the mode is determined by sblaster type.
# All OPL modes are 'Adlib', except for CMS.
# oplrate -- Sample rate of OPL music emulation.
sbtype=sb1
sbbase=220
irq=7
dma=1
hdma=5
mixer=true
oplmode=auto
oplrate=22050
[gus]
# gus -- Enable the Gravis Ultrasound emulation.
# gusbase,irq1,irq2,dma1,dma2 -- The IO/IRQ/DMA addresses of the
# Gravis Ultrasound. (Same IRQ's and DMA's are OK.)
# gusrate -- Sample rate of Ultrasound emulation.
# ultradir -- Path to Ultrasound directory. In this directory
# there should be a MIDI directory that contains
# the patch files for GUS playback. Patch sets used
# with Timidity should work fine.
gus=false
gusrate=22050
gusbase=240
irq1=5
irq2=5
dma1=3
dma2=3
ultradir=C:\ULTRASND
[speaker]
# pcspeaker -- Enable PC-Speaker emulation.
# pcrate -- Sample rate of the PC-Speaker sound generation.
# tandy -- Enable Tandy Sound System emulation (off,on,auto).
# For auto Tandysound emulation is present only if machine is set to tandy.
# tandyrate -- Sample rate of the Tandy 3-Voice generation.
# disney -- Enable Disney Sound Source emulation. Covox Voice Master and Speech Thing compatible.
pcspeaker=true
pcrate=22050
tandy=off
tandyrate=22050
disney=false
[joystick]
joysticktype=none
[]
1=dummy
2=dummy
3=disabled
4=disabled
[dos]
# xms -- Enable XMS support.
# ems -- Enable EMS support.
# umb -- Enable UMB support.
# keyboardlayout -- Language code of the keyboard layout (or none).
xms=true
ems=true
umb=true
keyboardlayout=de
[ipx]
# ipx -- Enable ipx over UDP/IP emulation.
ipx=false
[autoexec]
# Lines in this section will be run at startup.
# use 's60map' command to load your default /virtualkb mapping,
# specify mapping file to s60map using its system path
# (like c:/Data/mymap1.txt), not its mounted dos path
# shold probably keep those out of your dos tree anyway
#s60map e:/data/virtuakeybmap.txt
#s60map e:/data/premapper.txt
@echo off
echo -----------------------------
echo -----BOOTLOADER BY devil82-----
echo -----------------------------
echo Press 1 for Windows 3.1
echo Press 2 for Windows 95
echo press 3 for Norton Commander 5.0
echo press 4 for Windows98
:BOOT
choice /N /C:1234 /M "Please select your Operating System (Press 1, 2, 3, or 4)"%1
if ERRORLEVEL ==4 goto W98
if ERRORLEVEL ==3 goto NC5
if ERRORLEVEL ==2 goto W95
if ERRORLEVEL ==1 goto W31
goto END
:NC5
mount c e:\data\
mount e e:\
e:\
c:\Programs\nc\nc.exe
goto END
:W95
imgmount c e:\data\dos\windows\w95.img -t hdd -fs fat
boot -l c
goto END
:W31
:memsize 2
mount c e:\data
mount d e:\
c:
c:\windows\emm386.exe
c:\Windows\win.com
goto END
:W98
imgmount c e:\data\dos\windows\w98.img -t hdd -fs fat -size 512,63,16,518
boot -l c
alıntıdır
indirdiğiniz dosbox.conf dosyasına sağ tıklayın düzenle deyin ve eski kodu silin bu kodu yerine kopylayın sonra kaydedin işlem tamamdır işte kod
[sdl]
# devicescreenx,devicescreeny -- set to your display dimensions
# defaults are qvga (320x240) dimensions
# panoversized -- set to true if you want virtual screen panning for
# oversized resolutions when s60scaler=none
# will 'shrink' if set to false (default)
# pagestepx,pagestepy -- panning steps if panoversized=true' (defaults are 320/240)
# s60scaler -- select ouput scaler to use (default none)
# IMPORTANT:
# dont use leading, trailing or seperating whitespaces
# stick to the syntax "s60scaler=whatever"
# (reason: this is parsed for by a dumb parser, not the one in DOSBOX)
# NOTE:
# when s60 scaling is used mouse (touch-ui) input
# coordinates will be scaled from the device resolution
# to to the displayed resolution. keep that in mind when
# writing your virtual keyboard maps
# possible values:
# 'none' - no scaling (or halfsizing)
# 's60full' - use s60 bitmap scaling
# 's60aspect'
# 'swfull' - nearest pixel sw implemetation
# 'swaspect'
# !!!NOT SUPPORTED IN THIS RELEASE!!! 'glfull' - use opengl-es
# !!!NOT SUPPORTED IN THIS RELEASE!!! 'glaspect'
# rotatescreen -- rotates screen 180 degs if 'true' ('false' by default)
#
devicescreenwidth=640
devicescreenheight=360
panoversized=true
pagestepx=640
pagestepy=360
sensitivity=200
priority=higher,normal
s60scale=swfull
rotatescreen=false
[dosbox]
memsize=10
[cpu]
# core -- CPU Core used in emulation: ,dynamic (dynamic needs more ram!)
# cycles -- Amount of instructions DOSBox tries to emulate each millisecond.
# Setting this value too high results in sound dropouts and lags.
# You can also let DOSBox guess the correct value by setting it to max.
# The default setting (auto) switches to max if appropriate.
core=
cycles=3000
[mixer]
# nosound -- Enable silent mode, sound is still emulated though.
# rate -- Mixer sample rate, setting any devices higher than this will
# probably lower their sound quality.
# blocksize -- Mixer block size, larger blocks might help sound stuttering
# but sound will also be more lagged.
# prebuffer -- How many milliseconds of data to keep on top of the blocksize.
nosound=true
rate=22050
blocksize=2048
prebuffer=10
[midi]
# mpu401 -- Type of MPU-401 to emulate: none, uart or intelligent.
# device -- Device that will receive the MIDI data from MPU-401.
# This can be default,alsa,oss,win32,coreaudio,none.
# config -- Special configuration options for the device. In Windows put
# the id of the device you want to use. See README for details.
mpu401=none
device=default
config=
[sblaster]
# sbtype -- Type of sblaster to emulate:none,sb1,sb2,sbpro1,sbpro2,sb16.
# sbbase,irq,dma,hdma -- The IO/IRQ/DMA/High DMA address of the soundblaster.
# mixer -- Allow the soundblaster mixer to modify the DOSBox mixer.
# oplmode -- Type of OPL emulation: auto,cms,opl2,dualopl2,opl3.
# On auto the mode is determined by sblaster type.
# All OPL modes are 'Adlib', except for CMS.
# oplrate -- Sample rate of OPL music emulation.
sbtype=sb1
sbbase=220
irq=7
dma=1
hdma=5
mixer=true
oplmode=auto
oplrate=22050
[gus]
# gus -- Enable the Gravis Ultrasound emulation.
# gusbase,irq1,irq2,dma1,dma2 -- The IO/IRQ/DMA addresses of the
# Gravis Ultrasound. (Same IRQ's and DMA's are OK.)
# gusrate -- Sample rate of Ultrasound emulation.
# ultradir -- Path to Ultrasound directory. In this directory
# there should be a MIDI directory that contains
# the patch files for GUS playback. Patch sets used
# with Timidity should work fine.
gus=false
gusrate=22050
gusbase=240
irq1=5
irq2=5
dma1=3
dma2=3
ultradir=C:\ULTRASND
[speaker]
# pcspeaker -- Enable PC-Speaker emulation.
# pcrate -- Sample rate of the PC-Speaker sound generation.
# tandy -- Enable Tandy Sound System emulation (off,on,auto).
# For auto Tandysound emulation is present only if machine is set to tandy.
# tandyrate -- Sample rate of the Tandy 3-Voice generation.
# disney -- Enable Disney Sound Source emulation. Covox Voice Master and Speech Thing compatible.
pcspeaker=true
pcrate=22050
tandy=off
tandyrate=22050
disney=false
[joystick]
joysticktype=none
[]
1=dummy
2=dummy
3=disabled
4=disabled
[dos]
# xms -- Enable XMS support.
# ems -- Enable EMS support.
# umb -- Enable UMB support.
# keyboardlayout -- Language code of the keyboard layout (or none).
xms=true
ems=true
umb=true
keyboardlayout=de
[ipx]
# ipx -- Enable ipx over UDP/IP emulation.
ipx=false
[autoexec]
# Lines in this section will be run at startup.
# use 's60map' command to load your default /virtualkb mapping,
# specify mapping file to s60map using its system path
# (like c:/Data/mymap1.txt), not its mounted dos path
# shold probably keep those out of your dos tree anyway
#s60map e:/data/virtuakeybmap.txt
#s60map e:/data/premapper.txt
@echo off
echo -----------------------------
echo -----BOOTLOADER BY devil82-----
echo -----------------------------
echo Press 1 for Windows 3.1
echo Press 2 for Windows 95
echo press 3 for Norton Commander 5.0
echo press 4 for Windows98
:BOOT
choice /N /C:1234 /M "Please select your Operating System (Press 1, 2, 3, or 4)"%1
if ERRORLEVEL ==4 goto W98
if ERRORLEVEL ==3 goto NC5
if ERRORLEVEL ==2 goto W95
if ERRORLEVEL ==1 goto W31
goto END
:NC5
mount c e:\data\
mount e e:\
e:\
c:\Programs\nc\nc.exe
goto END
:W95
imgmount c e:\data\dos\windows\w95.img -t hdd -fs fat
boot -l c
goto END
:W31
:memsize 2
mount c e:\data
mount d e:\
c:
c:\windows\emm386.exe
c:\Windows\win.com
goto END
:W98
imgmount c e:\data\dos\windows\w98.img -t hdd -fs fat -size 512,63,16,518
boot -l c
alıntıdır
Benzer Konular
Diğer Windows İşletim Sistemleri
Windows XP İçin Masaüstü Hava Durumu Aracı (Rainmeter)
- ömer talat katı
- Windows İşletim Sistemi Genel
