win3.1 ve win95 5800 da !

DaNq3rB0y

kaptan 4 shared linki ölü

evroo

berkanbjk 24' Alıntı:
arkadaşlar dosbox.conf dosyasını tam ekran yapma kodunu buldum
indirdiğiniz dosbox.conf dosyasına sağ tıklayın düzenle deyin ve eski kodu silin bu kodu yerine kopylayın sonra kaydedin işlem tamamdır işte kod

[sdl]
# devicescreenx,devicescreeny -- set to your display dimensions
# defaults are qvga (320x240) dimensions
# panoversized -- set to true if you want virtual screen panning for
# oversized resolutions when s60scaler=none
# will 'shrink' if set to false (default)
# pagestepx,pagestepy -- panning steps if panoversized=true' (defaults are 320/240)
# s60scaler -- select ouput scaler to use (default none)
# IMPORTANT:
# dont use leading, trailing or seperating whitespaces
# stick to the syntax "s60scaler=whatever"
# (reason: this is parsed for by a dumb parser, not the one in DOSBOX)
# NOTE:
# when s60 scaling is used mouse (touch-ui) input
# coordinates will be scaled from the device resolution
# to to the displayed resolution. keep that in mind when
# writing your virtual keyboard maps
# possible values:
# 'none' - no scaling (or halfsizing)
# 's60full' - use s60 bitmap scaling
# 's60aspect'
# 'swfull' - nearest pixel sw implemetation
# 'swaspect'
# !!!NOT SUPPORTED IN THIS RELEASE!!! 'glfull' - use opengl-es
# !!!NOT SUPPORTED IN THIS RELEASE!!! 'glaspect'
# rotatescreen -- rotates screen 180 degs if 'true' ('false' by default)
#
devicescreenwidth=640
devicescreenheight=360
panoversized=true
pagestepx=640
pagestepy=360
sensitivity=200
priority=higher,normal
s60scale=swfull
rotatescreen=false
[dosbox]
memsize=10
[cpu]
# core -- CPU Core used in emulation: ,dynamic (dynamic needs more ram!)
# cycles -- Amount of instructions DOSBox tries to emulate each millisecond.
# Setting this value too high results in sound dropouts and lags.
# You can also let DOSBox guess the correct value by setting it to max.
# The default setting (auto) switches to max if appropriate.
core=
cycles=3000
[mixer]
# nosound -- Enable silent mode, sound is still emulated though.
# rate -- Mixer sample rate, setting any devices higher than this will
# probably lower their sound quality.
# blocksize -- Mixer block size, larger blocks might help sound stuttering
# but sound will also be more lagged.
# prebuffer -- How many milliseconds of data to keep on top of the blocksize.
nosound=true
rate=22050
blocksize=2048
prebuffer=10
[midi]
# mpu401 -- Type of MPU-401 to emulate: none, uart or intelligent.
# device -- Device that will receive the MIDI data from MPU-401.
# This can be default,alsa,oss,win32,coreaudio,none.
# config -- Special configuration options for the device. In Windows put
# the id of the device you want to use. See README for details.
mpu401=none
device=default
config=
[sblaster]
# sbtype -- Type of sblaster to emulate:none,sb1,sb2,sbpro1,sbpro2,sb16.
# sbbase,irq,dma,hdma -- The IO/IRQ/DMA/High DMA address of the soundblaster.
# mixer -- Allow the soundblaster mixer to modify the DOSBox mixer.
# oplmode -- Type of OPL emulation: auto,cms,opl2,dualopl2,opl3.
# On auto the mode is determined by sblaster type.
# All OPL modes are 'Adlib', except for CMS.
# oplrate -- Sample rate of OPL music emulation.
sbtype=sb1
sbbase=220
irq=7
dma=1
hdma=5
mixer=true
oplmode=auto
oplrate=22050
[gus]
# gus -- Enable the Gravis Ultrasound emulation.
# gusbase,irq1,irq2,dma1,dma2 -- The IO/IRQ/DMA addresses of the
# Gravis Ultrasound. (Same IRQ's and DMA's are OK.)
# gusrate -- Sample rate of Ultrasound emulation.
# ultradir -- Path to Ultrasound directory. In this directory
# there should be a MIDI directory that contains
# the patch files for GUS playback. Patch sets used
# with Timidity should work fine.
gus=false
gusrate=22050
gusbase=240
irq1=5
irq2=5
dma1=3
dma2=3
ultradir=C:\ULTRASND
[speaker]
# pcspeaker -- Enable PC-Speaker emulation.
# pcrate -- Sample rate of the PC-Speaker sound generation.
# tandy -- Enable Tandy Sound System emulation (off,on,auto).
# For auto Tandysound emulation is present only if machine is set to tandy.
# tandyrate -- Sample rate of the Tandy 3-Voice generation.
# disney -- Enable Disney Sound Source emulation. Covox Voice Master and Speech Thing compatible.
pcspeaker=true
pcrate=22050
tandy=off
tandyrate=22050
disney=false
[joystick]
joysticktype=none
[]
1=dummy
2=dummy
3=disabled
4=disabled
[dos]
# xms -- Enable XMS support.
# ems -- Enable EMS support.
# umb -- Enable UMB support.
# keyboardlayout -- Language code of the keyboard layout (or none).
xms=true
ems=true
umb=true
keyboardlayout=de
[ipx]
# ipx -- Enable ipx over UDP/IP emulation.
ipx=false
[autoexec]
# Lines in this section will be run at startup.
# use 's60map' command to load your default /virtualkb mapping,
# specify mapping file to s60map using its system path
# (like c:/Data/mymap1.txt), not its mounted dos path
# shold probably keep those out of your dos tree anyway
#s60map e:/data/virtuakeybmap.txt
#s60map e:/data/premapper.txt
@echo off
echo -----------------------------
echo -----BOOTLOADER BY devil82-----
echo -----------------------------
echo Press 1 for Windows 3.1
echo Press 2 for Windows 95
echo press 3 for Norton Commander 5.0
echo press 4 for Windows98
:BOOT
choice /N /C:1234 /M "Please select your Operating System (Press 1, 2, 3, or 4)"%1
if ERRORLEVEL ==4 goto W98
if ERRORLEVEL ==3 goto NC5
if ERRORLEVEL ==2 goto W95
if ERRORLEVEL ==1 goto W31
goto END
:NC5
mount c e:\data\
mount e e:\
e:\
c:\Programs\nc\nc.exe
goto END
:W95
imgmount c e:\data\dos\windows\w95.img -t hdd -fs fat
boot -l c
goto END
:W31
:memsize 2
mount c e:\data
mount d e:\
c:
c:\windows\emm386.exe
c:\Windows\win.com
goto END
:W98
imgmount c e:\data\dos\windows\w98.img -t hdd -fs fat -size 512,63,16,518
boot -l c

alıntıdır

teşekkürler bişekilde kodla oynayıp hallettim sendeki kodla aynı teşekkürler :oke:

Beşiktaşlı24

Xanymore

Linklerin tümünü yenilermisiniz

Beşiktaşlı24

arkadaşlar ben çalıştırdım wın 95 i fotolalrı burada var

Linkleri görüntülemek için kayıt olmalısınız

wın 95i tam olarak tam ekran yapamadım fakat yinede ekranı büyültebildim ve nedense wın 3.1 de işe yaramadı wın 3.1 yine küçük ekranda çalıştı :good:

- - - Eklendi - - -

buda dosbox.conf dosayasını kodları
[sdl]
# devicescreenx,devicescreeny -- set to your display dimensions
# defaults are qvga (320x240) dimensions
# panoversized -- set to true if you want virtual screen panning for
# oversized resolutions when s60scaler=none
# will 'shrink' if set to false (default)
# pagestepx,pagestepy -- panning steps if panoversized=true' (defaults are 320/240)
# s60scaler -- select ouput scaler to use (default none)
# IMPORTANT:
# dont use leading, trailing or seperating whitespaces
# stick to the syntax "s60scaler=whatever"
# (reason: this is parsed for by a dumb parser, not the one in DOSBOX)
# NOTE:
# when s60 scaling is used mouse (touch-ui) input
# coordinates will be scaled from the device resolution
# to to the displayed resolution. keep that in mind when
# writing your virtual keyboard maps
# possible values:
# 'none' - no scaling (or halfsizing)
# 's60full' - use s60 bitmap scaling
# 's60aspect'
# 'swfull' - nearest pixel sw implemetation
# 'swaspect'
# !!!NOT SUPPORTED IN THIS RELEASE!!! 'glfull' - use opengl-es
# !!!NOT SUPPORTED IN THIS RELEASE!!! 'glaspect'
# rotatescreen -- rotates screen 180 degs if 'true' ('false' by default)
#
devicescreenwidth=640
devicescreenheight=360
panoversized=true
pagestepx=640
pagestepy=360
sensitivity=200
priority=higher,normal
s60scale=swfull
rotatescreen=false
[dosbox]
memsize=10
[cpu]
# core -- CPU Core used in emulation: ,dynamic (dynamic needs more ram!)
# cycles -- Amount of instructions DOSBox tries to emulate each millisecond.
# Setting this value too high results in sound dropouts and lags.
# You can also let DOSBox guess the correct value by setting it to max.
# The default setting (auto) switches to max if appropriate.
core=
cycles=3000
[mixer]
# nosound -- Enable silent mode, sound is still emulated though.
# rate -- Mixer sample rate, setting any devices higher than this will
# probably lower their sound quality.
# blocksize -- Mixer block size, larger blocks might help sound stuttering
# but sound will also be more lagged.
# prebuffer -- How many milliseconds of data to keep on top of the blocksize.
nosound=true
rate=22050
blocksize=2048
prebuffer=10
[midi]
# mpu401 -- Type of MPU-401 to emulate: none, uart or intelligent.
# device -- Device that will receive the MIDI data from MPU-401.
# This can be default,alsa,oss,win32,coreaudio,none.
# config -- Special configuration options for the device. In Windows put
# the id of the device you want to use. See README for details.
mpu401=none
device=default
config=
[sblaster]
# sbtype -- Type of sblaster to emulate:none,sb1,sb2,sbpro1,sbpro2,sb16.
# sbbase,irq,dma,hdma -- The IO/IRQ/DMA/High DMA address of the soundblaster.
# mixer -- Allow the soundblaster mixer to modify the DOSBox mixer.
# oplmode -- Type of OPL emulation: auto,cms,opl2,dualopl2,opl3.
# On auto the mode is determined by sblaster type.
# All OPL modes are 'Adlib', except for CMS.
# oplrate -- Sample rate of OPL music emulation.
sbtype=sb1
sbbase=220
irq=7
dma=1
hdma=5
mixer=true
oplmode=auto
oplrate=22050
[gus]
# gus -- Enable the Gravis Ultrasound emulation.
# gusbase,irq1,irq2,dma1,dma2 -- The IO/IRQ/DMA addresses of the
# Gravis Ultrasound. (Same IRQ's and DMA's are OK.)
# gusrate -- Sample rate of Ultrasound emulation.
# ultradir -- Path to Ultrasound directory. In this directory
# there should be a MIDI directory that contains
# the patch files for GUS playback. Patch sets used
# with Timidity should work fine.
gus=false
gusrate=22050
gusbase=240
irq1=5
irq2=5
dma1=3
dma2=3
ultradir=C:\ULTRASND
[speaker]
# pcspeaker -- Enable PC-Speaker emulation.
# pcrate -- Sample rate of the PC-Speaker sound generation.
# tandy -- Enable Tandy Sound System emulation (off,on,auto).
# For auto Tandysound emulation is present only if machine is set to tandy.
# tandyrate -- Sample rate of the Tandy 3-Voice generation.
# disney -- Enable Disney Sound Source emulation. Covox Voice Master and Speech Thing compatible.
pcspeaker=true
pcrate=22050
tandy=off
tandyrate=22050
disney=false
[joystick]
joysticktype=none
[]
1=dummy
2=dummy
3=disabled
4=disabled
[dos]
# xms -- Enable XMS support.
# ems -- Enable EMS support.
# umb -- Enable UMB support.
# keyboardlayout -- Language code of the keyboard layout (or none).
xms=true
ems=true
umb=true
keyboardlayout=de
[ipx]
# ipx -- Enable ipx over UDP/IP emulation.
ipx=false
[autoexec]
# Lines in this section will be run at startup.
# use 's60map' command to load your default /virtualkb mapping,
# specify mapping file to s60map using its system path
# (like c:/Data/mymap1.txt), not its mounted dos path
# shold probably keep those out of your dos tree anyway
#s60map e:/data/virtuakeybmap.txt
#s60map e:/data/premapper.txt
@echo off
echo -----------------------------
echo -----BOOTLOADER BY devil82-----
echo -----------------------------
echo Press 1 for Windows 3.1
echo Press 2 for Windows 95
echo press 3 for Norton Commander 5.0
echo press 4 for Windows98
:BOOT
choice /N /C:1234 /M "Please select your Operating System (Press 1, 2, 3, or 4)"%1
if ERRORLEVEL ==4 goto W98
if ERRORLEVEL ==3 goto NC5
if ERRORLEVEL ==2 goto W95
if ERRORLEVEL ==1 goto W31
goto END
:NC5
mount c e:\data\
mount e e:\
e:\
c:\Programs\nc\nc.exe
goto END
:W95
imgmount c e:\data\dos\windows\w95.img -t hdd -fs fat
boot -l c
goto END
:W31
:memsize 2
mount c e:\data
mount d e:\
c:
c:\windows\emm386.exe
c:\Windows\win.com
goto END
:W98
imgmount c e:\data\dos\windows\w98.img -t hdd -fs fat -size 512,63,16,518
boot -l c

- - - Eklendi - - -

yaklaşık olarak 7.30 dakikaya açılıyor :angry:

- - - Eklendi - - -

yaklaşık olarak 7.30 dakikaya açılıyor :angry:

Joker

linkleri yenilermisiniz

tayo01

Kardeşim 5800 ram yüksek olsaydı tadından yenmezdi bildiğin windowsphone olurdu. Keşke Pc ye ram ekleme gibi 5800 e de olsaydı.

reisati34

llakin1907 arkadaşım bari bişey paylaşıyon linkler niye ölü ilkten verdiğin 2 dosyayı indirdim ama onları açmadı desteklemiyor diye alttakileri de indirmeye çalıştım indirmedi ya arkadaşım nolur şu linkleri düzelt bende indirebileyim

carandiru

kardeşim şu 4shared olayını mediafire a falan geçirsen iyi olur telefondan girenler için gerçekten sıkıntı ve linkler ölü. ben ses olayını sormak istiyorum windowstan müzik dinlemek mümkün olacak mı işletim sistemi telefonun ses donanımını tanıyor mu

DaNq3rB0y

linkler pert

- - - Eklendi - - -

şu linklerin hepsini upfile.mobi ye atsan bi daha hiç silinmez

win3.1 ve win95 5800 da !

DaNq3rB0y

evroo

Beşiktaşlı24

Xanymore

Beşiktaşlı24

Joker

tayo01

reisati34

carandiru

DaNq3rB0y

Benzer Konular