eddyredline
Üye
varsa dilin aç araştır burası paylasım alanı ama sadece program paylasım alanı birde sitem yapma
insanın en temel özelliği arştırmaktır sormak değil.
burada yapacagınız tek sey dogru komutu verip verdiginiz komutu dosbox ekranında gormektir
bu nu nasıl yarım?--->dosbox config dosyasını e:\data içine atın dosbox.conf dosyasını acın zaten indirdiginiz yerde fll gelecek fakat istediginizi yaptıracagınız yer eksiktir orayı siz gireceksiniz
ben anlamam bunları diyorsanız x-plore dosya yöneticisi olanlar
e ye gir data'ya gir ve oraya bir tex dosyası olustur sonra bu dosyayı dosbox.conf diye düzenle.
sıra gelelim bu dosyanın doldurulmasına
asagıda verdigim texi dediğim dosya kopyalayın ben farklı çalıştıgım için biraz degişiklik yaptım size zahmet [autoexec]kısmından sonra yapacagınız komutlar sizin elinizde birde
:NC5
mount c e:\
mount e d:\ burada gordugunuz c e: ve e d degişkendir ben windows os mac os ve symbion os lerin hepsinde denedim beni işim bu o dediğim değişkenler telefon üzerinde "c" ve "e" suruculerinin hangini kullanıyorsanız ona gore deneyin yeterki anlayarak yapın!!!
Su an için ısrarla soyluyorum hic bir işinize yaramayacak sadece çalısırlıgının kontrolunu yaparsınız
sisteminizi yavaslatır. bir cok programla çakışa bilir örnek : c++ artık telefon programlarının içinde geliyor ve o programlar bu olmadan ve ya degiştirildiginde hata yada çakısma veriyor ve/veya symbianda yok.
yapmayın diyecegima ama merak dimi adamın basına ne gelirse ya meraktan yada meraktandır
kalanını kendiniz becerin
# DOSBOX for s60 edited by Martin-prv and HtheB
[sdl]
# orientation -- used to set orientation on s60 devices
# normal -- use for landscape display devices
# cw -- (clockwise) use for portrait display devices (right handed button usage)
# ccw -- (counter-clockwise) use for portrait display devices (left handed button usage)
# fllscreen -- Start dosbox directly in fllscreen.
# flldouble -- Use double buffering in fllscreen.
# fllresolution -- What resolution to use for fllscreen: original or fixed size (e.g. 1024x768).
# windowresolution -- Scale the window to this size IF the output device supports hardware scaling.
# output -- What to use for output: surface,overlay,opengl,openglnb,ddraw.
# autolock -- Mouse will automatically lock, if you click on the screen.
# sensitiviy -- Mouse sensitivity.
# waitonerror -- Wait before closing the console if dosbox has an error.
# priority -- Priority levels for dosbox: lowest,lower,normal,higher,highest,pause (when not focussed).
# Second entry behind the comma is for when dosbox is not focused/minimized.
# mapperfile -- File used to load/save the ***/event mappings from.
# usescancodes -- Avoid usage of symkeys, might not work on all operating systems.
# keyhint -- When set to true, the first button press will display a hint about what
# *** you will get with the second button press.
# If the *** you want isn't there you can cancel by pressing cross.
orientation=cw
#fllscreen=true
flldouble=false
fllresolution=620x540
windowresolution=620x540
output=surface
autolock=true
sensitivity=50
waitonerror=true
priority=higher,normal
mapperfile=mapper.txt
#usescancodes=true
keyhint=false
[dosbox]
# language -- Select another language file.
# memsize -- Amount of memory dosbox has in megabytes.
# machine -- The type of machine tries to emulate:hercules,cga,tandy,pcjr,vga.
# captures -- Directory where things like wave,midi,screenshot get captured.
language=
machine=vga
#captures=capture
memsize=15
[render]
# frameskip -- How many frames dosbox skips before drawing one.
# aspect -- Do aspect correction, if your output method doesn't support scaling this can slow things down!
# scaler -- Scaler used to enlarge/enhance low resolution modes.
# Supported are none,normal2x,normal3x,advmame2x,advmame3x,hq2x,hq3x,2xsai,super2xsai,supereagle,
# advinterp2x,advinterp3x,tv2x,tv3x,rgb2x,rgb3x,scan2x,scan3x.
frameskip=1
aspect=true
scaler=normal2x
[cpu]
# core -- CPU Core used in emulation: normal,simple,dynamic,auto.
# auto switches from normal to dynamic if appropriate.
# cycles -- Amount of instructions dosbox tries to emulate each millisecond.
# Setting this value too high results in sound dropouts and lags.
# You can also let DOSBox guess the correct value by setting it to max.
# The default setting (auto) switches to max if appropriate.
# cycleup -- Amount of cycles to increase/decrease with keycombo.
# cycledown Setting it lower than 100 will be a percentage.
#core=dynamic
#cycles=sync
#cycleup=2500
#cycledown=400
#autocycle=true
#mincycles=600
#maxcycles=3000
core=dynamic
cycles=3000
[mixer]
# nosound -- Enable silent mode, sound is still emulated though.
# rate -- Mixer sample rate, setting any devices higher than this will
# probably lower their sound quality.
# blocksize -- Mixer block size, larger blocks might help sound stuttering
# but sound will also be more lagged.
# prebuffer -- How many milliseconds of data to keep on top of the blocksize.
nosound=false
rate=22050
blocksize=2048
prebuffer=10
[midi]
# mpu401 -- Type of MPU-401 to emulate: none, uart or intelligent.
# device -- Device that will receive the MIDI data from MPU-401.
# This can be default,alsa,oss,win32,coreaudio,none.
# config -- Special configuration options for the device. In Windows put
# the id of the device you want to use. See README for details.
mpu401=none
device=default
config=
[sblaster]
# sbtype -- Type of sblaster to emulate:none,sb1,sb2,sbpro1,sbpro2,sb16.
# sbbase,irq,dma,hdma -- The IO/IRQ/DMA/High DMA address of the soundblaster.
# mixer -- Allow the soundblaster mixer to modify the DOSBox mixer.
# oplmode -- Type of OPL emulation: auto,cms,opl2,dualopl2,opl3.
# On auto the mode is determined by sblaster type.
# All OPL modes are 'Adlib', except for CMS.
# oplrate -- Sample rate of OPL music emulation.
sbtype=sb1
sbbase=220
irq=7
dma=1
hdma=5
mixer=true
oplmode=auto
oplrate=22050
[gus]
# gus -- Enable the Gravis Ultrasound emulation.
# gusbase,irq1,irq2,dma1,dma2 -- The IO/IRQ/DMA addresses of the
# Gravis Ultrasound. (Same IRQ's and DMA's are OK.)
# gusrate -- Sample rate of Ultrasound emulation.
# ultradir -- Path to Ultrasound directory. In this directory
# there should be a MIDI directory that contains
# the patch files for GUS playback. Patch sets used
# with Timidity should work fine.
gus=false
gusrate=22050
gusbase=240
irq1=5
irq2=5
dma1=3
dma2=3
ultradir=C:\ULTRASND
[speaker]
# pcspeaker -- Enable PC-Speaker emulation.
# pcrate -- Sample rate of the PC-Speaker sound generation.
# tandy -- Enable Tandy Sound System emulation (off,on,auto).
# For auto Tandysound emulation is present only if machine is set to tandy.
# tandyrate -- Sample rate of the Tandy 3-Voice generation.
# disney -- Enable Disney Sound Source emulation. Covox Voice Master and Speech Thing compatible.
pcspeaker=true
pcrate=22050
tandy=off
tandyrate=22050
disney=false
[joystick]
joysticktype=none
[-]
-1=dummy
-2=dummy
-3=disabled
-4=disabled
[dos]
# xms -- Enable XMS support.
# ems -- Enable EMS support.
# umb -- Enable UMB support.
# keyboardlayout -- Language code of the keyboard layout (or none).
xms=true
ems=true
umb=true
keyboardlayout=none
[ipx]
# ipx -- Enable ipx over UDP/IP emulation.
ipx=false
[autoexec]
@echo off
echo ---Product by A.Fuat Demirel---
echo Windows 3.1 icin 1e bas
echo Windows 95 icin 2e bas
echo Norton Commander 5.0 icin 3e bas
:BOOT
choice /N /C:123 /M "Please select your Operating System (Press 1, 2, or 3)"%1
if ERRORLEVEL ==3 goto NC5
if ERRORLEVEL ==2 goto W95
if ERRORLEVEL ==1 goto W31
goto END
:NC5
mount c e:\
mount e d:\
c:
c:\Data\nc\nc.exe
goto END
:W95
imgmount d e:\data\Cdrive\w95.img -t hdd -fs fat
boot -l c
goto END
:W31
mount d c:\
mount c d:\Data\
mount d d:\
c:
c:\Windows\win.COM
:END
