kacaksevgilim
Üye
-
Konu Sahibi
-
RomPatcher+ v2.2 (Final Version)
Change-Log v2.1 > v2.2:
+ New: it is now possible to search / filter the patches in the list. Just start typing the patch name to apply the filter.
+ New: the wildcard "??" is now available for patch-makers.
eg. SnR
(NOTE: 3rd byte will be kept unchanged)
+ Improved: changed installer to place Open4All_RP+ patch in the proper drive.
+ Fixed: in the SnR command, only the first instance was patched successfully. Wasn't possible to patch further instances of the same byte pattern.
+ Fixed: memory corruption when the patch contains 2 or more changes to a RAM memory address (not in the ROM range) and the "apply patch" fails.
+ Fixed: red-icon is shown like in RP by ZoRN, ie. if the patch doesn't perform any change to the memory the red-icon will be shown (eg. when a patch contains only comments or unmatched SnR lines)
How to install:
There are 3 different ways to install RomPatcher+
1) If your phone has been hacked to allow installation of unsigned .sis then install RomPatcherPlus_2.2.sis
2) If your phone has been hacked and has the Leftup root CA, then just install the RomPatcherPlus_2.2.sisx
3) Otherwise, you can sign and install the "Lite Version", using a DevCert or OpenSigned Online. But, in this case, you MUST also manually copy BOTH the files patcher.ldd and patchershadow.ldd in c:\sys\bin\ folder
Change-Log v2.1 > v2.2:
+ New: it is now possible to search / filter the patches in the list. Just start typing the patch name to apply the filter.
+ New: the wildcard "??" is now available for patch-makers.
eg. SnR
(NOTE: 3rd byte will be kept unchanged)
+ Improved: changed installer to place Open4All_RP+ patch in the proper drive.
+ Fixed: in the SnR command, only the first instance was patched successfully. Wasn't possible to patch further instances of the same byte pattern.
+ Fixed: memory corruption when the patch contains 2 or more changes to a RAM memory address (not in the ROM range) and the "apply patch" fails.
+ Fixed: red-icon is shown like in RP by ZoRN, ie. if the patch doesn't perform any change to the memory the red-icon will be shown (eg. when a patch contains only comments or unmatched SnR lines)
How to install:
There are 3 different ways to install RomPatcher+
1) If your phone has been hacked to allow installation of unsigned .sis then install RomPatcherPlus_2.2.sis
2) If your phone has been hacked and has the Leftup root CA, then just install the RomPatcherPlus_2.2.sisx
3) Otherwise, you can sign and install the "Lite Version", using a DevCert or OpenSigned Online. But, in this case, you MUST also manually copy BOTH the files patcher.ldd and patchershadow.ldd in c:\sys\bin\ folder