Sim kilidi kırma

Sponsorlu Bağlantılar



    Konu Sahibi
Sim kilidi kırma

Generic Samsung Unlock Codes:

Samsung s500:

New Samsung E700:

Old Samsung E700:

Samsung a300

Samsung a800

Samsung s100

Samsung s300

Samsung v200

Samsung sgh-600

Samsung X100 & X600:

Samsung E715 and the S307:

This one is slightly more complicated.

Firstly, you will need to put a SIM card into the phone that is locked, ie: a SIM card from one of the blocked phone networks. When you power up the phone, you will get the message telling you that you have inserted an invalid SIM card. Type in:


If you have done this correctly, a message will pop up telling you to hit exit, press the right soft key and choose #7 to reboot your phone. After the phone has rebooted, type in:



Then after the confirmation message has appeared, reboot the phone once again. Insert a different SIM card and power up the phone, then enter in:



That's it, if you have followed all these instructions correctly, your Samsung E715 / S307 should now be unlocked.


DCT-4 Handsets:

1100, 2300, 3100, 3200, 3300, 3510, 3510i, 3650, 3660, 5100, 6100, 6220, 6230, 6310, 6310i, 6510, 6600, 6610, 6650, 6800, 6810, 6820,7200, 7210 ,7250, 7250i, 7600, 7700, 7650, 8310, 8910, 8910i, Nokia N-GAGE. (US & Canadian Model numbers may vary slightly).

DCT-4 Unlock Code Calculator:



The 3 main pieces of information you need to enter into the calculator are as follows:

1) IMEI Number. This is a 15 digit ****** number that can be found either under the battery of the phone, on the side of the original box you bought the phone with, or by typing in *#06#.

2) Lock Type: The lock type for your Nokia will most likely be "2". If however you have a Nokia 3650, 3660, 6600, 7650 or an N-gage, the lock type will be "5".

3) Network Provider.

Simply enter in the information relevant to your handset and network and click "Calculate". You will be presented with several unlock codes for your phone. You should remove the SIM card from your phone and enter one of the codes, if it fails, try a different one. Hopefully after entering one of the codes you should be presented with a "Phone Restriction Off" message.

General Nokia Information / Codes:

Obtaining the IMEI number:


Information you get from the IMEI number:



TAC = Type approval code
FAC = Final assembly code
SNR = ****** number
SP = Spare

Obtaining the software revision information:


Information you get from the Software revision:


V 05.50
1ST Line = Software revision

2ND Line = The date of the software release

3RD Line = Phone type

Service Menu Access:

To enter the service menu type:

*#92702689# (*#WAR0ANTY#)

****** number (IMEI)

Production date (MM/YY)

Purchase date (MM/YY) You can only enter the date once.

Date of last repair (0000=No repair)

Transfer user data to another Nokia phone via Infra-Red

Clock Stopping:

To check weather your SIM Card supports clock stopping type:

*#746025625# (*#SIM0CLOCK#)

Revealing Headphone and Car-Kit menus:

Please note that if you do these next tricks, the new menus can't be erased without retoring the factory default settings. To do these tricks you need to short-circuit the pins on the bottom of the phone next to where you plug in you charger.

1. To activate the "Headset" menu, you need to short-circuit pins "3" and "4". After a short time the word "Headset" will be shown in the display. Menu 3-6 is now enabled.

2. To activate the "Car" menu, you need to short-circuit pins "4" and "5". After a short time the word "Car" will be shown in the display. Menu 3-7 is now enabled.

The Rebooting Trick:

This should work on all software versions of the 6110.

1. Go to the Calendar (Menu - 8)

2. Make a note or reminder.

3. Enter some text into the edit box.

4. Hold "Clear" until the whole text is cleared, then press "Back".

5. Press "0". The main screen will now be showing but a space appears on the screen. (you can't see it)

6. Enter 4 digits (e.g. 1234).

7. Use the down arrow to move the cursor to the left side of the numbers and the space (Down arrow twice).

8. Now enter 6 digits and press the call button.

Wait for a few seconds, the screen should start to flash and reboots. It should alsowork on other menus like the "Profiles" menu.

EFR Call Quality:

To activate EFR (Enhanced Full Rate) Enter the code-


This improves call quality but decreases batterylife by about 5%

To deactivate it, Enter the code-

If you short-circuit theleft middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying.

Network Monitor:

There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone.

1. Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.
2. Take apart the phone.
3. De-solder the EEPROM (ATMEL AT 24C64).
4. Read out the data with an EEPROM programmer and save it to a file (Backup).
5. If you have v.33 or v4.73, change the address "03B8" from "00" to "FF".
6. If you have v5.24 then change the address "0378" from "00" to "FF".
7. Write the new data to the EEPROM and solder it back to the phone,
8. Power on your phone and you should have "Netmonitor" enabled.

The Network Monitor gives you the following information.

- Carrier number
- MS RX Level in DBM
- Received signal quality
- MS TX power level
- C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99.
- RTL (Radio link timeout).
- Timeslot
- Indication of the transmitter status
- Information on the Network parameters.
- TMSI (Temporary Mobile Subscriber Identity).
- Cell identification (Cell ID, Number of cells being used).
- MCC (Mobile country code)
- MCN (Mobile network code)
- LAC (Location area code)
- Ciphering (On/Off)
- Hopping (On/Off)
- DTX (On/Off)
- Discard cell barred information

Check SIM Lock:

Note - If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to check this because they both transmit on GSM900, and they don't lock the phones. However if you bought your phone on UK Orange or UK One2one your phone may be blocked. The reason is that they both transmitt on GSM1800. To make a call on GSM1800 you need what is known as a "Dual band" phone. A dual band phone is able to transmit on both GSM900 and GSM1800, so they lock the phones so you can't use it with any other network simcard. If you find that your phone is locked you can try different software to unlock it. (we havn't found one that works yet), or you can ask your service provider who will gladly exchange the 10 digit code for about £35.

This is how to check the status of the 4 different locks. Aslo don't try entering the wrong number, because after 3 times it will block the phone for good.

There are 4 different locks on your Nokia phone.


The code to read out the sim-lock status of your phone is


MASTERCODE = 1234567890

The master code is a secret code. The code has 10 digits, To read out the sim-lock status you can enter every combination you want!

"Y" Shows the status of the network-lock. Here you can enter a number from "1" to "4". The "4" is for the sim-card lock.

SIM-Lock Checks.



General Codes and Information:

[<] - Left arrow key
[>] - Right arrow key

* # 0 6 #
IMEI number (phone ****** no.) Must be the same number on the sticker inside your phone, if not your phone may have been cloned
Most phones, not only Ericsson

* # 0 0 0 0 #
Reset language to English (useful when itchy hands changed your phone&#39;s language to some other alien form
All Ericsson Phones

> * < < * < *
Service Menu - tells you the phone&#39;s software version (good for checking your phone&#39;s "age" before buying it); press "Yes" repeatedly to see all the software data & press ">" to see all the texts available in your phone (hundreds of them&#33;); some phones save "Flash?" option to reset the phone (I didn&#39;t see any difference after doing that)
All Ericsson Phones

< * * <
The famous SIM lock - Don&#39;t worry, you won&#39;t lock your phone yet. Just scroll & see the various locks that are available. Please don&#39;t lock your phone if you don&#39;t know what is the unlock code. I myself don&#39;t know, so don&#39;t ask me. This is another good check before you buy any phone, especially second hand ones. If phone is SIM locked
you may not be able to switch to other GSM operators

All Ericsson Phones
Method 1:
Scroll to "MissedCall";
press "Yes";
press & hold ">"

Method 2:
Scroll to "Read"; see
"No Messages";
press & hold "<"

Menu Size option

You can extend your phone&#39;s menu to include a few more options like Customise, Edit Phone Book, etc... Note that Set Alarm does not work. Customise allows you to rearrange the sequence of the
menus & to reset your phone. DO NOT RESET your phone here&#33;&#33;&#33; It will mess up your menu & you&#39;ll have to rearrange your menus again. When you want back the original menus, go back to Menu Size & reduce it.
Only GA628 with earlier software versions, will not work for GF/PF768 & all other models


1.Save a Missed Call into your phone directory

Scroll to "MissedCall", press "Yes" to display the required number. Press any number (i.e. 0 to 9),
then press "clear" once to clear that number, then press & hold "<" until you see "Store". Press "Yes"
& carry on from there...

2.Hide your number when calling (when you don&#39;t want the other party to know your number)

After dialing the required number & before pressing "Yes", press ">" twice to choose "Hide Id?" &
then press "Yes". Also works for pre-programmed & last dialled numbers, just press "No" & wait for
the number to appear on the screen first then follow same procedure.

3.Check you battery level when phone is off

Just press "No" quickly one time & wait for the battery meter to show up&#33;

4.Painless redialing

If you&#39;re sick & tired of hearing whether your redial gets through, well, don&#39;t&#33; The phone will give a
short ring automatically when the redial gets through, so put the phone to your ear only after you hear
the ring. Note: Only works for redial, not first call&#33;

5.Save a number into your phone memory (not SIM card)

Follow normal procedures to store a phone number. When prompted to set a storage position, press
"#" once (display will show "¤") & key in desired location, or press "#" twice for next available
position. GA628 can store 50 phone numbers in memory. Other phones may be able to store more.

6.Call a phone number from SMS message

Do you know you can do that? You can call from within a SMS message if the phone number is
written in it. Example of such a SMS message : Your wife just called. Call her at 7654321 Just scroll
the message until the phone number appears on the display, then press "Yes" to call.


General Codes / Info:

MOTOROLA 6200, 7500, 8200, 8400, 8700

To activate RBS (Engineering Menus):

[pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]

(pause means the * key held in until box appears)

You now have to press the [MENU] and scroll to the &#39;Eng Field Options&#39; function with the < or > keys, and enable it.

To de-activate RBS (Engineering Menus):

[pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]

(pause means the * key held in until box appears)

Works on 6200&#39;s,8200&#39;s,1-888&#39;s,7500&#39;s,8400&#39;s and GSM StarTacs with later than version .27 software.

Options under Eng Field Options

Active Cell

RxLev -55 Received powerlevel in dBm
NCC 0 National Colour Code, used for identifying channel
BCC 7 Broadcast Colour Code, also for identifying purposes
MSTxPwr 35 Max allowed transmit power 35dBm about 3.2W
C1 003 Is a calculated figure for the quality control signal which is constantly sent out from the RBS quality the signal
returning from the phone has. If this value is negative for more than 5 sec then the system will make a cell switch.
Time Adv xxx xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.

Adjacent Cells

Adj Cell 1
Channel 0033 Channel Number
RxLev -65 Received powerlevel in dBm
BCCH Decode I think it means it is able to decode the channel information contained in the BCCH
RxLevAM -104 Min allowed reception, compare with RxLev -65 and you get the C1 value which is 39 and reported back to base as
measure of field strength.
MTxPwr 35 Aain max allowed powerlevel
C1 003 ??
NCC 0 National Colour Code
BCC 6 Broadcast Colour Code

System Parameters

Combined Off ??

AcsClas 0000 Allows different priorities - this network doesn&#39;t support it.
MCC 505 Mobile Country Code, 505 for Australia, 240 for Swedes etc
MNC 01 Mobile Network Code, 01 for Mobilenet, 02 for Optus, 03 for Vodafone using MCC 505. MCC+MNC is often called Network Code
LAC 08720 Location Area Code, shows which exchange your&#39;re in
CellID 00473 Base Station Identity
T3212 005 Time between periodic network updates (either hours between or time remaing until update, not sure)
XZQTY 14.3 ??

Motorola Flip Pinout:

ANT- (O) | | | | | | | | | |
10 9 8 7 6 5 4 3 2 1
Top of phone (screen)

1) Audio Ground
2) Ext b+
3) T Data
4) C Data
5) R Data
6) Logic Ground
7) Audio Out - on/off
8) Audio In
9) Manual Test
10) Battery Feedback

bi zahmet ingilizceyi ceviren olursa solesin bunlari :)



Emekli Yönetici
Güzel döküman ama birisi türkçeye çevirirse süper olacak...


İyi çalışma olmuş, tebirkler.. :bravo:

Ama ceviri... :wacko:


    Konu Sahibi
evet bence de kardes.ceviri sart
ben de ise yarar diye ekledim siteye. gercekten ii dokuman...


bu bildiğimiz sim kilit kırmaysa süper döküman&#33; saol elusive tekrar&#33;


    Konu Sahibi
evet aynen dediğin gibi kardes. o işe yarıyor


gusel kardes elıne sagılık :)


ben ceviriim :)


Emekli Yönetici
bilad3er dostum türkçesini bekliyoruz.. ;)


tabiki dostum :)


beyler döküman bitmek uzere az kaldı :)


Selamun aleykum cümleten;

Cep telefonlarinin sim kartini kirma sekli 2 cesittir.

1.Kod ile

2. Kablo ile

Kod ile kirma teknigine deginecegim ben.Bazi model telefonlarin sim kartini kirmak icin ayni olan kodlar vardir.Bu kodlari asagiya yazacagim insAllah isinize yarar.Kodu telefona yazarken cep telefonunda simkart olmayacak&#33;

*,+,p,w kodlarini # bu tus ile yazabilirsiniz.

Ama sunuda hatirlatmak istiyorum bazi cep telefonlarinin versiyonu yüksek olursa bu kodlar calismaya bilir,sonra calismiyor veya söylemedi demeyinBazi markalarin kodlarida ayni olabiliyor&#33;


Samsung A300,A400,A800:*2767*637#

Samsung E400,E500,E700: *2767*688# veya #*7337#

Model: Samsung P400


In newer phones:

Model: Samsung S100


Model: Samsung S300


Model: Samsung S500


In newer phones:

Model: Samsung SGH600


Model: Samsung SGH2100


Model: Samsung V200


Ingilizcem iyi olmadigi icin bazi modellerinde koduyla beraber aciklamasini yaziyorum ama anlayamadim,ingilizcesi iyi olan bir kardesimiz aciklarsa sevinirim

Model: Samsung E715,X100,X600

Turn off the phone. Put a non-accepted SIM Card and turn it on. Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another SIM Card. Turn on. The code is 00000000.

In newer phones:

Nokia modellerin bazilarida kod ile sim kilidi kirilabiliyor,mesela 3310,3410,3510,3510i,1100,1100a,1100b,2600,2650,3100,3200,3220,3650,3660,6610,6610i,6210,6310,6310i,6230

diye devam ediyor....

Dedigim gibi böyle markalar kod ile sim kartlari kirilabilir,bana cep telefonun seri numarasini,telefonun arkasinda yazan(RH-18),hangi ülkeden ve suan hangi sim karta calistigini yazarsaniz burda olduugm sürece telefonunuzun sim kartini kirabilirim,ama tekrar söyliyeyim eger telefonun versiyonu yüksek ise kodla acilmaz o zaman telefoncuya gidip kablo ile actirmalisiniz

Cep telefonun IMEI(SERI NUMARASINI)ögrenmek icin

*#06# a basmaniz yeterli olacaktir&#33;


Beyler sımdılık bunu buldum ama cevirecem erak etmeyın sımdı tatıldeyım ınsallah gelınce halledcem :)


BİLAD3R abi iyi olmuş bu sağol


    Konu Sahibi
valla saol kardes


bu ne yaw türkçesi yokmu bunun :huhu:


senin okuman yazman yokmu?


Arkadaşlar bana Tel-i,t adında bir italyan markanın kilidini kırmak istiyorum ama onun koduna ulaşabilecek misiniz???


zor gıbı ama ararım


Sagol kardes, cok yararli olacak herkese bu bilgiler. Ah bide 6630&#39;u da unlock yapabilsek ama...&#33;&#33;&#33;


Originally posted by berdush@Jun 21 2005, 03:18 PM
Arkadaşlar bana Tel-i,t adında bir italyan markanın kilidini kırmak istiyorum ama onun koduna ulaşabilecek misiniz???
[post=92293]Quoted post[/post]​

arkadaşım imzanda mobil içerikli site muvcut lütfen imzanı degiştir yasak yoksa bamlanırsın.... :eksi: reklama girdigi için yasak

Benzer Konular

Üst Alt